Access Points; Browser Settings - LG Chocolate KU800 User Manual

Settings

Access points

This menu shows the access point list. You
can create new profiles, delete or edit them
by using the Option Menu. However, you
cannot delete or edit default configurations
depending on country variant.
You can edit the following configuration
items by selecting the right soft key.
Connection title
Bearer
Authentication
Username
Password
APN
] Press Done key to save any configuration
changes.
100
(Menu #.7.4)
Access Point profile name.
Choose the bearer from the list.
(Default is UMTS.)
Choose the authentication from the
list. (Default is No auth)
Information provided by service
provider.
Information provided by service
provider.
APN name to access network.
Information provided by service
provider.
11:30
AM

Browser settings

Profiles
Select the appropriate profile by pressing
. This will activate the profile to initiate
browser launch.
Security
If user presses Certificates, certification
information is shown.
User can clear secure session information by
pressing Session clear.
Certificates
If stored, a list of root/ca certificates required
for WTLS/TLS can be found here.
Certificates can be viewed from the list.
Session clear
Secure (WTLS/ TLS) session data can be
cleared using this option. Session data
should be cleared to establish a new secure
session.
Character encoding
Sets the browser default character set to one
of the following.
(Menu #.7.5)