Power Save - LG Chocolate KU800 User Manual

Note
] Three incorrect PIN code entries in the
PIN code entry window would invalidate
the PIN code. In this case, you have to
enter the PUK (PIN Unblock Key) code
to configure the PIN code again. The
maximum number of times you may
enter the PUK code is 10. (Note: If you
enter an incorrect PUK code10 times,
the USIM card will be blocked and must
be replaced.)
PIN2 code
PIN2 is the abbreviation for Personal
Identification Number 2, and is used to
restrict use by unauthorised users as with the
PIN. The PIN2 code change procedure is the
same as the one for the PIN code. 3
incorrect PIN2 code entries would invalidate
the PIN2 code. In this case, you have to
enter the PUK2 code in order to use the
PIN2 code again. The maximum number of
times you may try to enter the PUK2 code is
10, like PUK1. 10 incorrect PUK2 code
entries would invalidate the PIN2 code.
Security code
The security code is used to change the
mobile phone password. The maximum
number of attempts to enter the security
code is not limited as it is with PIN and PIN2.
Keypad lock
If you select Off, the keypad can be
activated only when the slide is open. If you
select On, you can activate the keypad by
pressing on the left side of the phone.

Power save

Decide whether to activate the power save
mode or not.
Memory status
User memory
This function shows the status of the user
memory of the mobile phone. Since this
function scans the overall file system for
statistics, a few seconds are required.
(Menu #.1.5)
(Menu #.1.6)
81