Location Of Parts And Controls - Sony Walkman WM-FX251 Operating Instructions

Location of parts and controls

(PLAY
TUNING –/+
RADIO ON/OFF
DC IN 3V
BAND
1-5 (preset)
To limit the maximum volume
Playing a tape
automatically
Set AVLS (Automatic Volume Limiter System) to
1
LIMIT. The maximum volume is kept down to
Set NORM•CrO /METAL to match the
2
protect your ears, even if you turn the volume up.
tape type.
To cancel the AVLS function, set AVLS to NORM.
NORM CrO 2 /METAL
Note
• Do not open the cassette holder while the tape is
running.
2
Insert a cassette and press (PLAY.
PLAY
To Press
Stop playback p
Fast-forward ) or 0 (For the side facing
or rewind the tape forward)
Listening to the radio
1
0 )
pSTOP
2
VOLUME
(
AVLS
NORM/CrO /METAL•
2
DX/LOCAL
2
3
To turn off the radio
Press RADIO ON/OFF.
To tune the station quickly
Hold down TUNING –/+ in step 3. The frequency
digits change quickly. When you release the button,
the frequency digits change slowly. When the
desired frequency digits appear, press TUNING –/+
again.
To improve broadcast reception
For FM, extend the headphones/earphones cord or
adjust the DX/LOCAL.
Press RADIO ON/OFF. For AM, reorient the unit itself.
RADIO
ON/OFF
FM
Press BAND to select the band (FM1, FM2,
FM3 or AM).
Each time you press the button, the display
changes.
AM
BAND
FM 1
MHz
Note
FM 2
If the broadcast becomes noisy when a cassette with a
MHz
metallic shell or label is inserted, remove the cassette.
To listen to the radio abroad
FM 3
The frequency range differs depending on the area.
MHz
If you listen to the radio in an area of different
frequency range, change the area indication in the
display.
AM
1 Press BAND for about 10 seconds while the radio
KHz
is turned on.
2 Press TUNING – or + to change the area
Press TUNING –/+ to tune the station you indication.
("U": U.S.A., Canada and Central and South
want.
America, "E": European and other countries).
TUNING + 3 Press BAND to set the frequency range.
–
Notes
• If you change the frequency range, all the preset
stations will be canceled.
• When you want to cancel during a change of the area
FM 1
indication.
MHz
Press BAND after pressing TUNING – or +, all the
preset stations will be canceled.
To preset radio stations
You can store radio stations into the unit's memory.
You can preset up to 20 radio stations, 5 for each
FM1, FM2, FM3 or AM bands.
1
Press RADIO ON/OFF.
RADIO ON/OFF
2
Tune in the desired station by using the
BAND and TUNING – or +.
3
Press a preset number (1-5) for 2 seconds,
the displayed frequency will flash with a
beep sound and the station is stored.
If a station is already stored, the new station
replaces the old one.
5
4
3
1
2
FM 1
MHz
To play the preset radio stations
Press BAND to select the band, and then press the
corresponding preset button.