Erasing Multiple Titles (Erase Titles); Dividing A Title (Divide Title) - Sony RDR-HX715 Operating Instructions Manual

b
Notes
• Images or sound may be momentarily interrupted at the
point where you erase a section of a title.
• Sections shorter than five seconds may not be erased.
• For DVD+RWs, the erased section may be slightly
different from the points you selected.
Erasing multiple titles (Erase
Titles)
+
HDD RW - RW
VR
You can select and erase more than one title at one
time using the TOOLS menu.
1
Press TITLE LIST.
2
Press TOOLS to select "Erase Titles," and
press ENTER.
The display for selecting titles to be erased
appears.
3
Select a title, and press ENTER.
A check mark appears in the check box next to
the selected title.
• To clear the check mark, press ENTER
again.
• To clear all of check marks, select "Reset
All."
Erase Titles
Select the titles to erase.
12 Tennis
11 Travel
10 Mystry
9 World Sports
8 Family
4
Repeat step 3 to select all of the titles you
want to erase.
5
When you finish selecting titles, select
"OK," and press ENTER.
The list of the titles to be erased appears for
confirmation.
• To change the selection, select "Change,"
and repeat from step 3.
6
Select "OK" and press ENTER.
The titles are erased.
+ -
- RW R R
Video
OK
10/28
Cancel
10/26
10/25
10/19
Reset All
10/17

Dividing a title (Divide Title)

*
- RW
HDD
VR
If you want to dub a long title to a disc but do not
want to reduce the picture quality, divide the title
into two shorter titles. Note that dividing a title
cannot be undone.
* Only playlist titles can be divided for DVD-RW (VR
mode).
1
Press TITLE LIST.
Press TOOLS and select "Original" or
"Playlist" from the TOOLS menu to switch
the Title Lists, if necessary.
2
Select a title, and press ENTER.
The sub-menu appears.
3
Select "Divide Title," and press ENTER.
The display for setting the dividing point
appears. The title starts to play in the
background.
• To return to the beginning of the title, press
PAUSE and then press . PREV.
X
Divide
4
Select the dividing point by pressing m/
M, and press ENTER.
The display asks for confirmation.
• To change the dividing point, select
"Change."
5
Select "OK," and press ENTER.
The display for entering the title name
appears.
• To use the same title name as before, select
"No."
6
Select "Yes," and press ENTER to enter a
new name.
Follow the explanations on page 38. After you
enter a new name, the title is divided in two.
1 Vacation
,continued
75