Step 2: Charging The Battery - Sony Walkman NW-MS77DR Operating Instructions Manual

Step 2: Charging the battery

Charge the built-in battery before using your Network Walkman.
Connect the AC power adaptor as illustrated below. The control buttons on your Network Walkman are all
disabled while it is attached to the USB cradle or the recording USB cradle.
1
Connect the AC power adaptor.
Connect the DC plug of the AC power adaptor to the DC IN jack of the USB cradle or the recording
USB cradle. Connect the AC plug to a wall outlet.
NW-MS70D/MS90D
NW-MS77DR
to DC IN
AC power adaptor
to DC IN
AC power adaptor
to wall outlet
to wall outlet
11
continued