6.3 - Regulation settings
For fitter's use only.
The regulation must be adjusted according the use of the boiler.
• Press
and
• Parameter #
• Press
or
• To start setting the displayed parameter press
• The parameter value, i.e*
• Press
or
• Press
or
• Press
and
* When outside minimum temperature (TEMI) below 0°C, a glittering point is on display right at bottom of
displayed figure : ie
(3 sec) to start setting menu for 4 minutes.
starts blinking in front of "°C"
(instant touch) to select next parameter, i.e
starts blinking in front of "bar".
(instant touch) to change setting.
(instant touch) to confirm setting and return to setting menu.
(3 sec) any time to exit the setting menu.
in front of "bar" means -5°C (and not 5°C)
Ascari - 12kW -page 25 -
°C, ... until
or
(instant touch).
°C