Step 2: Setting The Clock - Sony ICD-R100PC Operating Instructions (primary manual) Operating Instructions Manual

Step 2: Setting the Clock

Clock setting display appears when you insert batteries for the first time,
or when you insert batteries after the unit has been without batteries for a
certain period of time. In this case, proceed from step 2.
1
Display the clock setting display.
1 Press MENU to
enter the menu
mode.*
* The "ALARM" display
may appear instead of
the "MODE" display
(see page 44).
2
Set the date.
1 Press . or
> to select the
digits of the year.
1 Tip
This unit's clock system
supports the Year 2000
indication. To set the
date to Year 2000,
display "00Y".
8
GB
2 Press .once
to display "SET
DATE".
3 Press NPLAY/
STOP.
The year digits
will flash.
2 Press NPLAY/
STOP.
The month
digits will
flash.
3 Set the month
and day in
sequence, then
press NPLAY/
STOP.
The hour digits
will flash.