Shure Sound Isolating SE846 Manual page 5

Reassembling the Nozzle
1. Gently slide the insert into the nozzle.
Important: The insert needs to be fully seated. Reposition until it slides in easily. Do not force.
2. Insert the nozzle into the earphone, aligning the dots so it matches the keyed opening.
3. Place the threaded collar over the nozzle. After ensuring the threads are properly engaged, use the nozzle key
to gently turn clockwise.
Caution: There should be no resistance to turning the collar until fully threaded into the housing. Check the fol-
lowing:
◦ The insert is fully seated in the nozzle.
◦ The nozzle is properly seated in the housing (dots aligned).
4. Once you are certain that the nozzle is properly seated and the collar threaded all the way into the earphone
housing, use the key to tighten the collar just enough to ensure it will not loosen during normal earphone us-
age.
Shure Incorporated
5/7