Changing Sleeves; Removing The Earphones; Detachable Cable - Shure Sound Isolating SE846 Manual

Changing Sleeves

• Twist and pull to remove the sleeve from the nozzle.
• Slide on a new sleeve so that it completely covers the barb and the nozzle.
Caution: If the barb or any of the nozzle is exposed, the sleeve is not properly installed. Replace sleeves if they
do not tightly grip the nozzle. To ensure proper fit and performance, use only sleeves supplied by Shure (unless
using custom molded sleeves).

Removing the Earphones

Grasp the body of earphone and gently twist to remove.
Note: Do not pull on cable to remove earphone.

Detachable Cable

You may need to detach the cable from the earphones to attach optional components or to replace the cable if it
becomes damaged. To prevent accidental separation, the connector has a snug fit. Take special care to prevent
damage to the earphone and connector.
• Do not use pliers or other tools.
• Grasp the connector and the earphone as close as possible to where they join.
• Pull straight apart—do not twist. Cable is a snap fit, not threaded.
Note: If you pull at an angle, the connector will not detach.
• Do not pull on the cable or put any pressure on the earphone nozzle.
Shure Incorporated
2/7