Operation - Bissell 1716 User Manual

How To Use Your SpotLifter
Filling Your Clean/Solution Tank
Remove the Clean Tank by gently pressing the Quick
1.
Release tabs on the Clean Tank and sliding the tank off
of the unit.
Open the tank by unscrewing and removing the cap.
2.
Add water and formula* to the indicated fill lines on the
Clean Tank.
*NOTE: Your SpotLifter PowerBrush includes an
8 oz. Trial size formula starter bottle.
Replace the cap before placing the tank back on
3.
the unit.
Pre-Treating
To aid in the removal of tough, stubborn stains, pre-treating the
stain may be necessary.
Hold the unit above the area to be cleaned. Using the
1.
Manual Trigger Spray, apply a sufficient amount of water
and solution to the stain.
Wait 3-5 minutes before cleaning.
2.
Cleaning
Plug in the unit.
1.
While holding the SpotLifter PowerBrush above the area
2.
to be cleaned, apply water and formula by depressing
the Manual Trigger Spray, dispensing fluid to the
soiled/stained area.
Turn the power switch to the "ON" position. ( I )
3.
6
® PowerBrush
1.
2.
2.
3.