Adjustments - HP 432A Manual

Model 432A
Warranty
This Hewlett-Packard product is warranted against defects in materials and workmanship for a
period of one year from date of shipment. During the warranty period, Hewlett-Packard
Company will, at its option, either repair or replace products which prove to be defective.
For warranty service or repair, this product must be returned to a service facility designated by
HP. Buyer shall prepay shipping charges to HP and HP shall pay shipping charges to return the
product to Buyer. However, Buyer shall pay all shipping charges, duties, and taxes for products
returned to HP from another country.
HP warrants that its software and firmware designated by HP for use with an instrument will
execute its programming instructions when properly installed on that instrument. HP does not
warrant that the operation of the instrument, or software, or firmware will be uninterrupted or
error free.
Limitation of Warranty
The foregoing warranty shall not apply to defects resulting from:
1
2
3
4
5
6
THE WARANTY SET FORTH IS EXCLUSIVE AND NO OTHER WARRANTY, WHETHER
WRITTEN OR ORAL, IS EXPRESSED OR IMPLIED. HP SPECIFICALLY DISCLAIMS THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE.
Limitation of Remedies and Liability
THE REMEDIES PROVIDED HEREIN ARE BUYER'S SOLE AND EXCLUSIVE REMEDIES.
IN NO EVENT SHALL HP BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
OR CONSEQUENTIAL DAMAGES (INCLUDING LOSS OF PROFITS) WHETHER BASED ON
CONTRACT, TORT OR ANY OTHER LEGAL THEORY.
Responsibilities of the Customer
The customer shall provide:
1
2
3
4
5
Improper or inadequate maintenance, adjustment, calibration, or operation by Buyer;
Buyer-supplied software, hardware, interfacing or consumables;
Unauthorized modification or misuse;
Operation outside of the environmental and electrical specifications for the product;
Improper site preparation and maintenance; or
Customer induced contamination or leaks.
Access to the products during the specified periods of coverage to perform maintenance.
Adequate working space around the products for servicing by Hewlett-Packard personnel.
Access to and use of all information and facilities determined necessary by Hewlett-Packard to
service and/or maintain the products. (Insofar as these items may contain proprietary or
classified information, the customer shall assume full responsibility for safeguarding and
protection from wrongful use.)
Routine operator maintenance and cleaning as specified in this manual.
Consumables such as paper, disks, magnetic tapes, ribbons, inks, pens, gases, solvents, lamps,
filters, fuses, seals, etc.
Regulatory Information
v