Listening To Tracks In A Desired Sequence (Program Play); Using The Group Function; What Is A Disc With Group Settings - Sony Walkman MZ-E310 Operating Instructions Manual

Listening to tracks in a
desired sequence (Program
Play)
1
Do the steps 1 and 2 in "Selecting the
play mode" (page 10), select "PGM"
in step 3 and then press MENU/
ENTER.
2
Press . or
select the track number.
3
Press MENU/ENTER.
The track is entered.
4
Repeat steps 2 and 3 to select other
tracks in the desired sequence.
5
Press MENU/ENTER for 2 seconds
or more.
The settings are entered and playback
starts from the first programmed
track.
z
• The program play settings will remain in
memory even after playback finishes or is
stopped.
• You can set the program play up to 20 tracks.
12
-GB
repeatedly to
N>
Track number
Program number
• You can specify the play mode for a selected
group when group mode is on. To activate
group mode, see "Selecting and playing
specific groups (Group Skip Function)"
(page 13).
• The play mode can also be selected when the
player is paused or stopped.
Notes
• All program settings are lost when the lid is
opened.
• If no settings are made for 5 minutes while the
player is stopped, the settings made up to that
point are entered.
• During program setting, you cannot do group
mode's on/off setting.
• If you turn on group mode during program
play, the program play is canceled.
Using the group
function
The player can be used with a disc which
has group setting.
The group function is useful for playing a
great number of tracks, or tracks that have
been recorded in MDLP (LP2/LP4) mode.
What is a disc with group
settings?
This is a disc with settings that organize
tracks into groups, and which allow those
groups to be selected.
The player does not support the recording
of group settings. Use your MD recorder
to record information, and then use the
player for playback.
Disc
Group 1
Track
number
1 2 3 4
Group 2 Group 3
Track
Track
number
number
5 6 7 8