Page 2
NCR, therefore, reserves the right to change specifications without prior notice. All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some instances, photographs are of equipment prototypes. Therefore, before using this document, consult with your NCR representative or NCR office for information that is applicable and current.
7761-K182 (USB Dual RJ12 Expansion) Installation Procedure 1. Install the Expansion Funnel and Standoffs (4) into the rear of the Ebox. Caution: Always use a soft material (cloth, foam) to protect the display screen when placing the terminal face down.
Page 6
7761-K182 (USB Dual RJ12 Expansion) 3. Install the Expansion Board assembly into the funnel and secure to standoffs with screws (4). 4. Secure the Hinge Mount to the hinge of the stand and secure with screws (3).
Page 7
7761-K182 (USB Dual RJ12 Expansion) 5. Install the Hinge Mount over the Expansion Board assembly. 6. Secure to rear housing with screws (2).