Advertisement
Quick Links
Advertisement
Related Manuals for NANO FONT
Summary of Contents for NANO FONT
- Page 1 FONT Quick guide...
- Page 2 Double check the power cord polarity. If you plug the module backwards you might damage its electronic circuits. If you flip over your FONT filter, you will find the “RED” mark at the PCB power connector, which must match the colored line on the ribbon cable.
- Page 3 CV Resonance Attenuverter Attenuverter CVF Input Control CVR Input Control 1V/Octave Input Un-attenuated Frequency CV, calibrated for 1V/Oct CV Frequency CV Resonance Input Input 2-Pole Band Pass Audio Output Input 2-Pole Low Pass Output FONT NANO Modules - València 2019 ©...
- Page 4 VCF as an additional oscillator. /CVR resonance Resonance attenuverter. Adjusts the amount and polarity of resonance modulation from the CVR input. frequency Fig. 4 Band Pass Filter FONT NANO Modules - València 2019 ©...
-
Page 5: Inputs And Outputs
filter frequency to track the keyboard note. Notice that when resonance is set to its maximum value, with no input signal, FONT behaves like a sine wave oscillator. /CVR Resonance control voltage. A voltage of +4V starts bringing the filter to self-oscillation. - Page 6 Listen to the tone at the LP2 output. Using a screwdriver, adjust the trimmer resistor at the back of the circuit board until the musical intervals played on the keyboard are correctly reproduced. FONT NANO Modules - València 2019 ©...
- Page 7 EN 61000-3-3. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. • EN 62311. Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields. • RoHS2: 2011/65/EU • WEEE: 2012/19/EU FONT NANO Modules - València 2019 ©...
-
Page 8: Technical Specifications
• This guarantee covers Any defect in the manufacturing of this product. Replacement or repair, as decided by NANO Modules. • This guarantee does not cover Any damage or malfunction caused by incorrect use , such as, but not limited to: Power cables connected backwards.