Backup And Restore Parameter Data - Epson RC700 Manual

3. Software

3.2.4 Backup and Restore Parameter Data

After creating a PG robot, you can save its parameter data in a file. This file can be used
as a backup, and can also be used to create PG robots on other systems.
To backup PG robot parameter data:
30
(1) Select System Configuration from the Setup menu.
(2) Select the Robot from the System Configuration.
(3) Select the desired PG robot from the list of Robot, and then select a PG
parameter.
(4) Click the <Save>button.
(5) Browse to the desired location and enter the desired filename.
(6) Click the <Save>button.
RC700 / RC90 option PG motion system Rev.2