Bissell PowerSteamer 1692 User Manual page 7

To Fill The Tank-in-Tank (Continued)
Using the Measuring Cup, pour BISSELL Deep Cleaning
4.
Formula into the mouth of the bladder.
Fill to the bottom of the neck with hot tap water. Do not
5.
boil or microwave water.
NOTE: Fill slowly to reduce sudsing.
Replace the Tank Lid, matching the Lid and Tank edges.
6.
Rotate the handle to carrying position. Replace Tank
in machine base, seating firmly in place. Rotate
handle back down to latched position.
When It's Time To Empty The Tank-in-Tank
NOTE: Remove the Tank-in-Tank, following
steps 1 through 3 on page 6 .
Pour out dirty water.
1.
After each use, remove and rinse the Lint Screen located
2.
on the Tank Lid.
Remove Tank Lid, follow step 3 on page 6.
A.
Remove Lint Screen. Rinse under faucet to
B.
remove any debris.
Insert Lint Screen back in Tank Lid. The
C.
screen will click into place.
Replace Tank Lid.
D.
Refill with cleaning solution and clean tap water, follow
3.
steps 4-5 above.
NOTE: When a cleaning job is complete, rinse out the
Tank-in-Tank by running clean water between the
bladder and the tank.
Return the Tank-in-Tank to the machine, follow
4.
step 6 above.
Refer to the Maintenance/Storage section on the
5.
next page for final cleanup.
ug310-5907_1692-1694_205.indd 7 ug310-5907_1692-1694_205.indd 7
4
6
1
Lint Screen
2B
Lint Screen
5
Latched
Tip:
A special red float device in the tank
will cause the cleaner to stop remov-
ing solution from the carpet. The motor
sound will rise in pitch to let you know
the dirty water tank is full.
5
2C
7
4/18/05 9:19:56 AM 4/18/05 9:19:56 AM