Download Print this page
GE SmartWater GXITQ Installation Instructions
GE SmartWater GXITQ Installation Instructions

GE SmartWater GXITQ Installation Instructions

Advertisement

Available languages

Available languages

Quick Links

INSTALLATION INSTRUCTIONS

GE Model GXITQ and GXITQR Filters
Your new GE icemaker water filter comes complete with all the necessary hardware for installation.
Each filter gives you up to six months of great-tasting water.
Filter should be changed after 6 months of use.
REQUIRED TOOLS FOR INSTALLATION
• a tube cutter
• 7/16", 1/2" and 9/16" wrenches
• a knife
• a bucket or pan
CAUTION: Using pliers or vise grips WILL
damage the fittings.
WARNING
Do not use where water is microbiologically
unsafe or with water of unknown quality
without adequate disinfection before or
after the filter.
Small parts remaining after the installation
could be a choke hazard. Discard safely.
Models Flow rate
GXITQ
GXITQR (1.9 lpm)
If slow water or hollow ice occurs, replace filter.
• Protect from freezing. Drain filter when room temperature drops below 32°F. (0°C.).
• Use the in-line water filtering system on a potable, safe-to-drink, home COLD water supply only. The filter
will not make unsafe water safe to drink. Do NOT use on HOT water (100°F. max.).
• Do not install on line pressure above 125 psi (862 kPa), or below 25 psi (172 kPa).
• All of the refrigerator installation requirements must be met when installing the filter.
• Do not use wicking or pipe dope sealer for fitting connections into head of filter. Teflon® tape is
recommended and included. Teflon is a registered trademark of DuPont.
• Do not install in direct sunlight.
• Installation must comply with existing state or local plumbing codes.
For Use and Care questions call: GE Answer Center® 800.626.2000
GENERAL ELECTRIC COMPANY, Appliance Park, Louisville, KY 40225
GE SmartWater
SPECIFICATIONS
Service
Service
Life
0.5 gpm 2000 gal. or 6 months
(7571 liters)
INSTALLATION PRECAUTIONS
Part No. 215C1001P014
(8-99 JR)
1
OPTIONAL TOOLS FOR INSTALLATION
• a file
• sandpaper
System tested and certified by NSF
international against ANSI/NSF
Std. 42 for the reduction of chlorine
(Class 1), and taste and odor.
Max.
Pressure
Temp.
25–125 psi
100° F.
(172–862 kPa) (38° C.)
Pub. No. 49-50027-1

Advertisement

loading

Summary of Contents for GE SmartWater GXITQ

  • Page 1: Installation Instructions

    INSTALLATION INSTRUCTIONS GE Model GXITQ and GXITQR Filters Your new GE icemaker water filter comes complete with all the necessary hardware for installation. Each filter gives you up to six months of great-tasting water. Filter should be changed after 6 months of use.
  • Page 2 — This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. — Liability on the part of GE under this or any other warranty for any indirect or consequential damage.
  • Page 3 Filtros GE modelo GXITQ y GXITQR Su nuevo filtro de agua GE para fábrica de hielo se surte completo e incluye todos los accesorios necesarios para la instalación. Cada filtro le brindará agua de excelente sabor hasta por seis meses. El filtro deberá cambiarse después de 6 meses de uso.
  • Page 4 — La responsabilidad de parte de GE, bajo esta o cualquier otra garantía por cualquier daño indirecto o consecuencial. — Los productos utilizados para usos comerciales o industriales.

This manual is also suitable for:

Smartwater gxitqr