Table of Contents
Advertisement
Optional Mounting Hardware & Accessories
X-0248-167-1 Dual Mount
Will mount 1 or 2 WRR-805As
(screws supplied) to a camcorder
supplied with an NP-1, DC-500
or an A-8278-057-A bracket. The
clip on back of WRR-805A case
slides on.
NP-1 Box
Battery case/ mount. Supplied
with Betacam, Betacam SP
and some DVCAM models.
Allows mounting of BTA-
801A, WRR-810A or X-
0248-167-1 bracket
WRR-805A Case / mount.
(supplied accessory ).
Main case (left) can be
mounted to optional dual
bracket. Detached Velcro
strap (right) allows
mounting to handle of
consumer camcorders.
A-8278-057-A Mounting Bracket. CA-WR855 Adapter.
For mounting of any Sony UHF
portable tuner (with tuner
supplied hardware shown) to
most Sony professional
camcorder models. Included with
BKW-L601 battery mount.
DC-500 Box
For the BP-L90 battery.
Optional battery case/mount for
Betacam, Betacam SP and some
DVCAM models. Allows
mounting of BTA-801A, WRR-
810A or X-0248-167-1 bracket
Anton Bauer Battery Adapters/Brackets *
Fig. 16
Using the "V" wedge mount
system allows WRR-855A to
be mount to DVCAM models
and provides power and audio
connections to/from the
camcorder
Supplied Hardware.
Top
Piece
Bottom
Piece
Included with the BTA-801A
and WRR-810A. Mounts to 4-
hole system on NP-1, A-8278-
057-A, etc... Clips on the BTA-
801A & WRR-810A insert into
these.
* For all other broadcast
models
* Illustration shown provided by Anton Bauer
BTA-801 Adapter.
Allows WRR-855A to be
mounted to Sony
camcorders equipped with
8278-057-A or
an A-
NP-1, DC-500
K-1334 Adapter Cable
Converts the locking 1/8"
mini-plug output of WRR-
805A to balanced male XLR.
This allows the WRR-805A
to be connected to any
professional camcorder.
* For DVCAM
-9-
Advertisement
Table of Contents
