Setting Up The Print Server; Accessing The Print Server Via Ipp - ActionTec 802PSG User Manual

Using Internet
Printer Protocol
This appendix explains how to use Internet Printer Protocol (
Print Server using Internet Protocol (
nected to the Print Server can be accessed by users over the Internet, provided they
know the printer model, printer port, and IP address of the Print Server.

Setting Up the Print Server

It is not necessary to modify the Print Server's settings to implement
should be familiar with the Print Server's
rectly set to the network's
contact the system administrator. To share the Print Server with Internet users
outside the local area network (
outside address and if a gateway, router, or firewall is installed, that these devices
IP
do not block the
IPP
router user manual for more information about
tion settings.

Accessing the Print Server via IPP

If the Print Server is properly configured using
to it over the Internet is done using the standard "Add New Printer" procedure:
1. From the computer's desktop, select Start, then Control Panel.
IP
settings. If unaware of the network's routed
IP
), the Print Server must be configured with an
LAN
. Contact the system administrator or consult the gateway or
). Using this method, the printers con-
settings, making sure they are cor-
IPP
or port mapping configura-
DMZ
, accessing a printer connected
IPP
61
b
) to access the
IPP
. The user
IPP
settings,
IP