Cisco ASR-920-12CZ-A Hardware Installation Manual page 26

Safety Guidelines
Do not work on the system or connect or disconnect cables during periods of lightning activity.
Warning
Statement 1001
Before performing any of the following procedures, ensure that power is removed from the DC circuit.
Warning
Statement 1003
Read the installation instructions before connecting the system to the power source. Statement 1004
Warning
Warning This product relies on the building's installation for short-circuit (overcurrent) protection. For a DC
installation, ensure that the branch circuit breaker is rated a maximum 15A for DC systems. For AC
systems, 15A for voltages greater than 200Vac; 20A for voltages below 127Vac. Statement 1005
Warning This unit is intended for installation in restricted access areas. A restricted access area can be
accessed only through the use of a special tool, lock and key, or other means of security.
Statement 1017
Cisco ASR 920 Series Aggregation Services Router Hardware Installation Guide
2-4
Chapter 2 Preparing for Installation
OL-32751-01