Cisco ASR-920-12CZ-A Hardware Installation Manual page 15

Chapter 1 Cisco ASR 920 Series Aggregation Services Router Overview
Table 1-1
Specification
Airflow
Cable access
System throughput
Power Supply
Modularity
Redundant
AC
Power
Specification
DC
Power
Specification
Operating
Temperature
Alarms
TDM Support
Mounting option
Port Configuration
Port Numbering
OL-32751-01
Cisco ASR-920-12CZ and Cisco ASR-920-4SZ Router Specifications (continued)
ASR-920-12CZ-A/ASR-920-12CZ-D
Front to back
Front cable access
32 Gbps
None
Yes
Yes
115 W
Yes
110 W
–40º C to 70º C
When using Smart SFPs, the
Note
systems should not operate
beyond 40º C.
The temperature range will
Note
vary for supported SFP/SFP+
installed on the router. See the
corresponding SFP/SFP+
documentation for more
details.
4 alarm dry contact inputs
•
(normally open)
LED indicators for critical, major
•
and minor alarms
None
• Front or rear rail 19 inches or 23
inches
• ETSI 300 mm cabinet
• Wall Mount (with only side
mount option).
Note For more information, see
Wall Mounting the
Cisco ASR 920 Series Router
, page 3-9.
12x1G and 2x10G/1G ports
4x1G SFP – Port [0:3]
8x1G Combo – Port [4:11]
2x10G – Port [12-13]
Cisco ASR 920 Series Aggregation Services Router Hardware Installation Guide
Cisco ASR 920 Router Features
ASR-920-4SZ-A/ASR-920-4SZ-D
Front to back
Front cable access
42 Gbps
None
Yes
Yes
105 W
Yes
105 W
–40º C to 70º C
When using Smart SFPs, the
Note
systems should not operate
beyond 40º C.
The temperature range will
Note
vary for supported SFP/SFP+
installed on the router. See the
corresponding SFP/SFP+
documentation for more
details.
4 alarm dry contact inputs
•
(normally open)
LED indicators for critical, major
•
and minor alarms
None
• Front or rear rail 19 inches or 23
inches
• ETSI 300 mm cabinet
• Wall Mount (with only side
mount option)
Note For more information, see
Wall Mounting the
Cisco ASR 920 Series Router
, page 3-9.
2x1G and 4x10G/1G ports
2x1G Copper – Port [0:1]
4x10G – Port [2-5]
1-5