Pump Replacement - Bissell PROHEAT PRO-TECH #1699 Repair Manual

B
issell PowerSteamer® ProHeat™ Series Service Center Repair Guide
1. Unplug the unit.
2. Remove the two solution tanks.
3. Remove spray tips from guides.
4. Remove the brush and cog belt by removing the screw from the orange retaining collar.
5. Remove belt from pulley.
6. Remove all lines and tubes from pump unit.
7. Remove pump from unit after first removing four retaining screws.
Printed February, 2001
1/30/2004 (Revision 1)

PUMP REPLACEMENT

15