Optional Accessories - Makita PC5010C Instruction Manual

OPTIONAL ACCESSORIES

CAUTION:
These accessories or attachments are recommended for use with your Makita tool spec-
ified in this manual. The use of any other accessories or attachments might present a risk of injury to persons.
Only use accessory or attachment for its stated purpose.
CAUTION:
Your tool is supplied with a guard for concrete planing with offset diamond wheel. When
you use the tool for other application, always use the appropriate optional accessory.
If you decide to use your tool with approved accessories which you purchase from your Makita distributor or fac-
tory service center, be sure to obtain and use all necessary fasteners and guards as recommended in this manual.
Your failure to do so could result in personal injury to you and others.
If you need any assistance for more details regarding these accessories, ask your local Makita Service Center.
• Offset diamond wheel (Dry type)
• Dust cover brush
2
3
4
5
NOTE: Some items in the list may be included in the tool package as standard accessories. They may differ from
country to country.
2
3
6
10
7
5
-
1
2
3
4
5
6
7
8
9
10
11
12
13
14
-
1
8 2
9
11
Wheel Guard (for grinding wheel)
Depressed center wheel / Multi-disc
Abrasive cut-off wheel / Diamond wheel
16 ENGLISH
12
125 mm (5") model
Grip 36
Inner flange 45
Lock nut 5/8-45
Back up pad
Flex wheel
Rubber pad 115
Abrasive disc
Sanding lock nut 5/8-48
Wire wheel brush
Wire cup brush
Wheel Guard (for cut-off wheel)
Lock nut wrench 28
13
3
14
5