Check Your Pre-Installed Io Libraries Suite - Agilent Technologies U2121A Quick Start Manual

B. Check Your Pre-Installed IO Libraries Suite
Agilent U2100A Series Digital IO, 32-Terminal Quick Start Guide
To check the version of your pre- installed IO Libraries Suite, right- click
IO Control icon on your taskbar notification area and select About Agilent
IO Control. Agilent IO Control window will appear and the version of
installed IO Libraries Suite will be displayed as shown below.
i. If Agilent IO Libraries Suite version 14.1 or lower has been pre-installed
Requires uninstalling of Agilent IO Libraries Suite version 14.1 or
lower.
1 To uninstall, go to Start > Control Panel > Add or Remove Programs and
select Agilent IO Libraries Suite 14.1 or lower version.
2 Click Change/Remove and select Remove when the instructions on the
screen prompted to proceed uninstalling the IO Libraries Suite
version 14.1 or lower from your PC.
3 To install version 14.2 or higher, go to
Suite Version 14.2 or
ii. If Agilent IO Libraries Suite 14.2 has been pre-installed
If you have the IO Libraries Suite 14.2 pre- installed on your PC, skip
Step C and proceed D to
iii. If Agilent IO Libraries Suite is not installed
If you do not have IO Libraries Suite installed on your PC, go to
Install the Agilent IO Libraries Suite Version 14.2 or
C. Install the Agilent IO Libraries
Higher.
i. Agilent U2121 IVI Driver.
Higher.
C.
13