Bissell ProHeat 2X Select BS-9400F Troubleshooting Manual page 10

Solution 3:
Pull and lift grey latch on back of Tank to unlatch and remove tank lid.
Place Tank Lid upside down and remove red Lint Filter basket located inside lid on the left hand side
Pull red plastic flap up and hold it away from red Lint Filter with one hand. Then with your other hand
lift small tab on the side of the red Lint Filter Basket to remove red Lint Filter Basket from Tank Lid
Using your finger tips, remove any debris from the red Lint Filter Basket and rinse red Lint Filter in
hot tap water and a mild detergent so that it is clean
Place red Lint Filter Basket back in its position in the Tank Lid, ensuring it is securely in place with
no gaps around it so that it is air tight. Is there suction now?
No, Refer customer to Authorised Service Centre
Prepared by Monique Lania
Remove the tank-in-tank assembly from the unit
Remove Tank Lid from Tank
How?
How?
Yes, problem solved
10
Call Servicing Guide ProHeat 2X 9400F.doc