Setting For Shared Stock - Casio V-REGI Series Reference Manual

5.2. Setting for Shared Stock

Shared Stock inline setting is same as Check Tracking for Master and Satellite on Control
Panel. There is no extra Shared Stock setting for inline. Once set Control Panes, please
restart terminal to start Shared Stock Process force.
About Stock setting for inline, please set same setting for all terminals.
To reduce Master load, please set "No detail data" at "Stock control setting" > "Clear stock
when Z".
All of "Stock in/out detail" and "Stock in/out total" data are store on Stock Master.
Important
Please make sure to perform following steps when shared stock function is programmed and
going to start use at customer site.
1. Perform OS reboot for all the units connected via inline.
2. Perform function test of shared stock control function according to your programming.
3. Perform "Init2" to clearing stock data which was created during your test.
31