Bluetooth® Operation - JVC UX-D427S Instruction Manual

Bluetooth® Operation
Pairing the unit with a Bluetooth
1. Press the SOURCE button on the unit or directly press the BT button on the remote
control to select the Bluetooth® mode. The display will show "BT READY".
2. Activate your Bluetooth® device and select the search mode. "UX-D427S" will appear on
your Bluetooth® device list.
3. If you cannot find the unit, press and hold the
on the remote to enter PAIRING MODE. The unit display will show "PAIR" and the voice
prompt "PAIRING" will be heard.
4. Select "UX-D427S" and enter "0000" for the password if necessary. If connection is
successful, the display will show "BT" followed by the voice prompt stating "PAIRED".
5. To disconnect the Bluetooth® function, switch to another function on the unit or disable
the function from your Bluetooth® device. You will hear "DISCONNECTED" from the
voice prompt.
If your Bluetooth
If your Bluetooth
• To pause / resume playback, press
• To skip to a track, press
To increase or decrease the volume, press VOL + / – .
•
• The operational range between the unit and the device is approximately 8 metres.
• Before connecting a Bluetooth® device to the unit, ensure you know the device's capabilities.
• Compatibility with all Bluetooth® devices is not guaranteed.
• Any obstacle between the device and the unit can reduce operational range.
• Keep this player away from other electronic devices that may cause interference.
• If no other Bluetooth® devices pairs with this unit within 2 minutes, the unit will recover to its previous
connection.
• The player will also be disconnected when your device is moved beyond the operational range.
26
®
device to listen to music:
®
device supports A2DP, play music via your device.
®
device supports AVRCP, use supplied remote control to control play.
/ .
button on the unit or / PAIR button
.