Sony CG-FX120 User Manual page 95

3 After the computer has cooled, loosen and remove the screw that secures the
cover of the memory bay on the bottom of your computer. Use an
appropriate screwdriver.
Removing the memory module cover
4 Touch a metal object (such as the connector panel on the back of your
computer) to discharge any static electricity.
5 Remove the memory module.
Removing memory module
1
1 Pull the tabs in the direction of the arrows.
The memory module is released.
6 Tighten the screw on the memory bay cover.

Your computer comes with a memory module installed in the memory slot. To
upgrade your memory, remove this module from the slot before installing your
upgrade memory module.
2
1
2 Pull the memory module in
the direction of the arrow.
Adding Memory
Screwdriver
Screw
95