Sony CG-FX120 User Manual page 23

Back
1 Modem jack
2 USB connectors
3 Serial connector
4 Printer connector
Warning:
Only connect 10BASE-T and 100BASE-TX cables to the Ethernet network port.
Do not connect any other type of network cable or any telephone line.
Connecting cables other than those listed above may result in an electric
current overload and could cause a malfunction, excessive heat, or fire in the
connector. To connect the unit to the network, contact you network
administrator.

There is a ventilation slot located between the Ethernet connector and the USB
connector. Do not cover the ventilation slot when your computer is on.
Locating Controls and Connectors
cover
5
6 Ethernet connector
7
Monitor connector
DC In connector
23