Other Operations; Using The Sleep Timer; Adjustments Using The Set Up Menu - Sony HT-SL40 Operating Instructions Manual

Other Operations

Using the Sleep Timer

You can set the receiver to turn off
automatically at a specified time.
After pressing ALT (page 35), press
SLEEP while the power is on.
Each time you press the button, the display
changes cyclically as follows:
2-00-00 t 1-30-00 t 1-00-00 t 0-30-00
t OFF
The display dim after you have specified the
time.
Tip
To check the remaining time before the receiver turns
off, press ALT, then press SLEEP. The remaining
time appears in the display.
GB
30
GB08OTR_HT-SL55.p65
Adjustments using the
SET UP menu
The SET UP menu allows you to make the
following adjustments.
1
2
3
4
Initial settings
Parameter
DVD-XXXX
TV-XXXX
DEC. XXXX
x Audio input mode for DVD function
Lets you select the audio input mode for DVD
function.
• "AUTO" gives priority to digital signals when
there are both digital and analog connections. If
there are no digital signals, analog is selected.
• "OPT" specifies the digital audio signals input
to the DIGITAL DVD OPT IN jacks.
• "COAX" specifies the digital audio signals
input to the DIGITAL DVD COAX IN jacks.
• "ANLG" specifies the analog audio signals
input to the DVD IN (L/R) jacks.
30
Press MAIN MENU repeatedly to select
" SET UP ".
Press or to select the parameter
V v
you want to adjust.
Press B or b to select the setting you
want.
The setting is entered automatically.
Repeat steps 2 to 3 until you have set
all of the parameters that follow.
Initial setting
AUTO
AUTO
PCM (for DVD),
AUTO (for TV/SAT)
(DVD-XXXX)
28/4/2003, 11:58 AM
HT-SL55 4-247-583-12(1) GB