Specifying The Speaker Parameters - Sony HT-SL40 Operating Instructions Manual

Sony home theater system operating instructions
Table of Contents

Advertisement

Specifying the speaker
parameters
1
Press MAIN MENU repeatedly to select
the " SET UP ".
2
Press
V
or
v
to select the parameter
you want to adjust.
3
Press
or
to select the setting you
B
b
want.
The setting is entered automatically.
4
Repeat steps 2 to 3 until you have set
all of the parameters that follow.
Initial settings
Parameter
DIST. X.X m
L
R
DIST. X.X m
C
DIST. X.X m
SL
SR
PL. XXXX
SL
SR
x Front speaker distance
(
DIST. X.X m)
L
R
Set the distance from your listening position to
the front speakers (A on page 14).
x Center speaker distance
(
DIST. X.X m)
C
Set the distance from your listening position
to the center speaker. Center speaker distance
should be set from a distance equal to the front
speaker distance (A on page 14) to a distance
1.5 meters closer to your listening position
(B on page 14).
GB04SPK_HT-SL55.p65
x Surround speaker distance
(
Set the distance from your listening position to
the surround speakers. Surround speaker
distance should be set from a distance equal to
the front speaker distance (A on page 14) to a
distance 4.5 meters closer to your listening
position (C on page 14).
Tip
The receiver allows you to input the speaker position
in terms of distance. However, it is not possible to set
the center speaker further than the front speakers.
Also, the center speaker cannot be set more than
1.5 meters closer than the front speakers.
Likewise, the surround speakers can not be set further
away from the listening position than the front
Initial setting
speakers. And they can be no more than 4.5 meters
3.0 m
closer.
This is because incorrect speaker placement is not
3.0 m
conducive to enjoy surround sound.
3.0 m
Please note that, setting the speaker distance closer
LOW
than the actual location of the speakers will cause a
delay in the output of the sound from that speaker. In
other words, the speaker will sound like it is further
away.
For example, setting the center speaker distance
1–2 m closer than the actual speaker position will
create a fairly realistic sensation of being "inside" the
screen. If you cannot obtain a satisfactory surround
effect because the surround speakers are too close,
setting the surround speaker distance closer (shorter)
than the actual distance will create a larger sound
stage.
Adjusting these parameter while listening to the
sound often results in much better surround sound.
Give it a try!
15
DIST. X.X m)
SL
SR
28/4/2003, 11:58 AM
HT-SL55 4-247-583-12(1) GB
continued
GB
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ht-sl50Ht-sl55

Table of Contents