Using An S-Air Product - Sony HT-FS3 Operating Instructions Manual

Using an S-AIR product

The system is compatible with the S-AIR
function (page 64), which allows sound
transmission between the system and an S-AIR
receiver (not supplied).
About S-AIR products
There are two types of S-AIR products.
• S-AIR main unit (this subwoofer): This is for
transmitting sound. You can use up to three
S-AIR main units. (The number of usable
S-AIR main units depends on the use
environment.)
• S-AIR sub unit (S-AIR receiver) (not
supplied): This is for receiving sound. You can
enjoy system sound in another room.
Room A
S-AIR sub unit
(S-AIR receiver)
Room B
S-AIR main unit
S-AIR sub unit
(S-AIR receiver)
Inserting the wireless
transmitter/transceiver
To make use of the S-AIR function, you need to
insert the wireless transmitter into the subwoofer
and the wireless transceiver into the S-AIR sub
unit.
Notes
• When you insert the wireless transmitter/transceiver,
make sure that the AC power cord (mains lead) is not
connected to a wall outlet (mains).
• Do not touch the terminals of the wireless transmitter/
transceiver.
To insert the wireless transmitter
into the subwoofer
1
Remove the screws and detach the slot
cover.
Slot cover
BD IN DVD IN
ONLY FOR SS-FS3
L
R
DC 5V
0.7A MAX
SPEAKER
DMPORT
Rear of the subwoofer
Notes
• Remove the screws from the slot cover bearing
the caution mark. Do not remove other screws.
• The slot cover is no longer necessary; however,
keep it after detaching.
0 0
T 1
W -
E Z
AM
FM
75 COAXIAL
EZW-T100 ANTENNA
SAT/CATV IN TV OUT HDMI
OPTICAL COAXIAL
TV IN DIGITAL 1 IN DIGITAL 2 IN
DIGITAL
L
R
AUDIO IN
TV
continued
49
GB