Table of Contents
Advertisement
Installing the speakers on the
wall
You can install your front and surround
speakers on the wall.
1
Prepare screws (not supplied)
that are suitable for the hole on
the back of each speaker. See
the illustrations below.
more than 25 mm
Hole on the back of the speaker
2
Fasten the screws to the wall.
The screws should protrude 5
to 7 mm.
5 to 7 mm
12
GB
more than 4 mm
4.6 mm
10 mm
3
Hang the speakers on the
screws.
Hole on the back of the speaker
Notes
• Use screws that are suitable for the wall material
and strength. As a plaster board wall is especially
fragile, attach the screws securely to a beam and
fasten them to the wall. Install the speakers on a
vertical and flat wall where reinforcement is
applied.
• Contact a screw shop or installer regarding the wall
material or screws to be used.
• Sony is not responsible for accident or damage
caused by improper installation, insufficient wall
strength or improper screw installation, natural
calamity, etc.
4.6 mm
10 mm
Advertisement
Table of Contents
