Sony DAV-HDX285 Operating Instructions Manual page 78

x After pairing
Sound transmission is established between the
paired unit and S-AIR sub unit(s) only.
Your room
This unit
ID A
ID A
S-AIR sub unit
Pairing
To perform pairing
1
Place the S-AIR sub unit that you want
to pair near the unit.
Note
• Remove headphones from the surround
amplifier (if connected).
2
Match the IDs of the unit and the S-AIR
sub unit.
• To set the ID of the unit, see "To set the ID
of the unit" (page 75).
• To set the ID of the S-AIR sub unit, refer
to the operating instructions of the S-AIR
sub unit.
3
Press SYSTEM MENU.
4
Press X/x repeatedly until "PAIRING"
appears in the front panel display, then
press
Note
• When the wireless transmitter is not inserted in
the unit, "PAIRING" cannot be selected.
5
After "START" appears in the front
panel display, press
The unit starts pairing and "SEARCH"
flashes in the front panel display.
To cancel pairing, press SYSTEM MENU.
78
GB
Neighbor
No transmission
ID A
S-AIR sub unit
or c.
.
6
Start pairing of the S-AIR sub unit.
x For the surround amplifier
Refer to the operating instructions of the
surround amplifier.
When sound transmission is established,
"PAIRING" and "COMPLETE" appear
alternately in the front panel display.
x For the S-AIR receiver
Refer to the operating instructions of the
S-AIR receiver.
When sound transmission is established,
"PAIRING" and "COMPLETE" appear
alternately in the front panel display.
Note
• Perform pairing within several minutes of Step
5. If you do not, "PAIRING" and
"INCOMPLETE" appear alternately in the front
panel display. To continue pairing, press
start again from Step 5. To cancel pairing, press
SYSTEM MENU.
7
Press SYSTEM MENU.
The system menu turns off.
Note
• After you have performed pairing, if you select
"S-AIR ID" (page 77), the ID setting ("A," "B," or
"C") that you last used is displayed first by default.
To cancel pairing
Perform the ID setting of the unit according to
the procedure of "To set the ID of the unit." If
you select a new ID, pairing is canceled.
If sound transmission is
unstable
For the surround amplifier
For the S-AIR receiver
If you use multiple wireless systems which share
the 2.4 GHz band, such as wireless LAN or
Bluetooth, the transmission of S-AIR products
or other wireless systems may be unstable. In
this case, the transmission may be improved by
changing the following "RF CHANGE" setting.
1
Press SYSTEM MENU.
and