Sony DAV-HDX285 Operating Instructions Manual page 38

4
Press .
The setting is made.
5
Press SYSTEM MENU.
The system menu turns off.
About speaker output
The table below describes the options when you connect all the speakers to the unit and you set
[SPEAKER FORMATION] to [STANDARD] (page 80).
For Australian models, the default setting is "A.F.D. STD." For other models, the default setting is
"A.F.D. MULTI" (when connecting the headphones to the unit, the default setting is "HP 2CH").
Sound from
Depending on the source.
38
GB
Surround effect Effect
"A.F.D. STD" The system discriminates the sound format of the source and
presents sound as it was recorded/encoded.
(AUTO FORMAT
DIRECT STANDARD)
"A.F.D. MULTI" • 2 channel source: The system outputs 2 channel sound from
the front and surround speakers by assigning the 2 channel
(AUTO FORMAT
DIRECT MULTI)
sound to the surround left and right channels.
• Multi-channel source: The system outputs sound from the
speakers depending on the number of channels of the
source.
"PRO LOGIC" • 2 channel source: The system simulates surround sound
from 2 channel sources and outputs sound from all the
"PLII MOVIE"
speakers.
"PLII MUSIC"
– "PRO LOGIC" performs Dolby Pro Logic decoding.
– "PLII MOVIE" performs Dolby Pro Logic II movie
– "PLII MUSIC" performs Dolby Pro Logic II music mode
• Multi-channel source: The system outputs sound from the
speakers depending on the number of channels of the
source.
"2CH STEREO" The system outputs the sound from the front speakers and
subwoofer regardless of sound format or number of channels.
Multi-channel surround formats are downmixed to 2
channels.
"HP 2CH" The system outputs the sound from the headphones
regardless of sound format or number of channels. Multi-
(HEADPHONE 2
CHANNEL STEREO)
channel surround formats are downmixed to 2 channels.
mode decoding.
decoding.