Setting Up The Network - Sony BDV-E980W Operating Instructions Manual

For the surround amplifier
Press and hold SECURE LINK on the rear of the
surround amplifier until the LINK/STANDBY
indicator turns green or flashes green.
If wireless transmission is
unstable
[RF Channel]
If you use multiple wireless systems, such as a
wireless LAN (Local Area Network) or
Bluetooth, the wireless signals may be unstable.
In this case, the transmission may be improved
by changing the following [RF Channel] setting.
1
Press HOME.
The home menu appears on the TV screen.
2
Press C/c to select
3
Press X/x to select [System Settings],
then press .
4
Press X/x to select [Wireless Sound
Connection], then press
The [Wireless Sound Connection] display
appears.
5
Press X/x to select [RF Channel], then
press .
6
Press X/x to select the desired setting,
then press .
• [Auto]: Normally select this. The system
automatically selects the better channel
for transmission.
• [1], [2], [3]: The system transmits sound
by fixing the channel for transmitting.
Select the channel with the better
transmission.
The transmission may be improved by changing the
transmission channel (frequency) of the other wireless
system(s). For details, refer to the operating
instructions of the other wireless system(s).

Setting up the Network

[Internet Settings]
Before setting, connect the system to the
network. For details, see "Step 3: Connecting to
the Network" (page 27).
To open the setting display
1
[Setup].
2
.
3
Press HOME.
1 2
4 5
7 8
0
HOME
The home menu appears on the TV screen.
Press C/c to select
Press X/x to select [Network Settings],
then press .
3
6
9
[Setup].
55
GB