Download Print this page

Advertisement

Quick Links

Getting Started
ALWAYS BRING YOUR OWN HEADPHONES to every shoot!
Make sure your batteries are fully charged. Battery snaps into back of camera; to
remove battery hit battery release button near the base of the handle.
Always start by calibrating your LCD display for the current lighting conditions.
Many cinematographers prefer to shoot using the viewfinder rather than the flip-
out screen; Especially if you are shooting outdoors in bright sunlight, the snap-on
viewfinder reduces glare; also, many documentary filmmakers shooting in
uncontrolled situations find the flip-out screen problematic bgecause the subject /
bystanders can get distracted trying to look at what you're shooting (on the other
hand, if you're shooting yourself, the flip screen can be very handy). Your camera
kit includes a clip-on viewfinder attachment - to use the viewfinder, clip it onto the
LCD screen using the built-in clips.
For handheld / documentary shooting, the built-in shoulder mount provides
excellent ergonomics, allowing you to balance the camera on your shoulder for
even weight distribution and steady shooting. Release the shoulder mount by
pulling the tab underneath the camera.
Make sure date and time are set correctly when you power on (this is useful
metadata that is written to your clips as you record.
If you're using the viewfinder, make sure the diopter ring is set correctly for your
eyesight; if you wear glasses and prefer shooting without glasses, try calibrating
the diopter for your vision (use slider on viewfinder)
Format your memory card before starting to record – make sure footage from
previous user is cleared off. A 32GB card will hold around two hours of footage.
To format: MENU > OTHERS > MEDIA FORMAT > MEMORY CARD > OK
Always shoot in manual for professional-quality recording: put IRIS, EXPOSURE
(buttons on side of camera), and ZOOM (bottom of camera, under the lens) into
manual mode before you start shooting.
Always check your recording format before each shoot to make sure camera is in
the right mode. Your editing system can handle a range of formats, but it is
important to make sure that you are shooting consistently in whatever format you
choose for your project (rather than mixing formats in FCP, which requires
rendering and is hypothetically problematic if you leave FCP for color correction
or layoff). A GOOD GENERAL FORMAT IS 1080 / 24P FX (1920 * 1080
GETTING STARTED WITH THE SONY EA50
(Quick Reference Guide)

Advertisement

loading

Summary of Contents for Sony EA50

  • Page 1 GETTING STARTED WITH THE SONY EA50 (Quick Reference Guide) Getting Started ALWAYS BRING YOUR OWN HEADPHONES to every shoot! • Make sure your batteries are fully charged. Battery snaps into back of camera; to • remove battery hit battery release button near the base of the handle.
  • Page 2 resolution, 24 fps progressive, 24 Mbps). To check or change your recording format: MENU > REC / OUT SET > REC SET > REC FORMAT. If you anticipate a very long shoot with more hours of footage than can be stored •...
  • Page 3 c)Put on ND filter if image is too bright with open iris d)Press expanded focus button to dial in on subject e)Turn focus ring f) Use push auto focus to confirm focus in a rushed situation (works better in good lighting) Zooming Camera includes optical / power zoom (on lens) and digital zoom (switch on...
  • Page 4 Keep Gain in MANUAL mode (push GAIN / ISO button until “A” disappears in • viewfinder) - do not ever shoot with auto gain! Camera switch under gain button has Low, Medium, and High gain modes. Gain • values can be customized in MENU > CAMERA SET > GAIN SET Shutter Speed Changing the shutter speed can also change the brightness (slower speed = •...
  • Page 5: Picture Profile

    Audio: - ALWAYS USE HEADPHONES! Headphone jack is in the handle. - ALWAYS USE AN EXTERNAL MIC, mounted in a shockmount if possible. The shockmount screws into the hotshoe mount on top of the camera. If you’re only using one mono external mic, you may want to use the internal mic on the second audio channel for a backup track.
  • Page 6 the intensity of the brightest part of the picture: a) AUTO KNEE – camera may change knee mid-shot – this isn’t really generally desirable – it may cause highlights to flicker b) KNEE POINT – Allows you select point where curve starts attenuating. gives protection against blowing out highlights;...
  • Page 7 Remove the card from the camera and use an SD card reader connected to your • computer (or insert the card directly into your computer if you are using a laptop with a built-in card slot) Review detailed Slugfilm workflow tutorial (http://slugfilm.ucsc.edu/ •...