Charging Without The Cradle; Pairing Your Headset - Sony SCEH-00075 User Manual

4.3 Charging without the cradle

You can charge the headset directly from a USB device.
Wireless Headset
USB connector
3
mini-B connector
USB cable
1
Check that the device the headset is to be connected to is turned on.
2
Insert the USB connector of the supplied USB cable into an available USB connector.
3
Insert the mini-B connector of the USB cable into the headset USB connector.
When power is first applied to the headset, the mic muting indicator lights up solid red for two seconds and
then flashes on and off until the headset is fully charged.

5. Pairing your headset

Before you can use the Wireless Headset with any device, such as a PS3™ system or a mobile phone, the
headset must be paired with the desired device.
You can pair your headset in either of two ways:
• A utomatic mode (using the supplied USB cable) – the headset includes a variety of advanced features
for the PS3™ system which can be enabled by pairing (registering) the headset and the PS3™ system
using automatic mode. Using automatic mode, you can pair the headset with any PS3™ system, but only
the most recently paired PS3™ system will be saved in the headset's list of paired devices. For more
information, see "7.Connecting your headset to Bluetooth
• B luetooth discovery mode – set up the headset as a standard Wireless Headset. Using Bluetooth
®
discovery mode, you can pair the headset with many other Bluetooth
recently paired devices are saved in the headset's list of paired devices. For more information,
see "7. Connecting your headset to Bluetooth
Hints
The headset's advanced features for the PS3™ system are available only when you use the automatic mode to pair
the headset with the PS3™ system.
To access the advanced features, the system software in use on the PS3™ system must be version 2.50 (or later).
PS3™ system
2
USB connector
devices."
®
1
devices."
®
devices. The eight most
®
®