Connect Supplied Ac Power Adaptor - Sony MDR-RF885RK Operating Instructions Manual

C To connect to TV, etc.
If noise occurs when the transmitter is
connected to your TV or VCR, set the
NOISE FILTER switch to ON.
1 2 3 R
CHANNEL DC IN 9V
to INPUT A jacks
Right channel
(red)
Connecting cord
(supplied)
to stereo mini jack
Notes
• If you connect the transmitter to LINE OUT or
REC OUT jacks of an audio reproducer such as an
MD player or CD player, do not set the NOISE
FILTER switch to ON. Otherwise, volume will be
limited.
• The NOISE FILTER switch is active only in the
case of the connection shown in diagram A on
page 7 and C. In diagram B, the switch has no
effect.
• When the transmitter is placed on or near a TV, it
may pick up a noise.
In such a case, place the transmitter away from the
TV.
8
Transmitter
A L B
OFF ON
INPUT NOISE FILTER
Left channel
(white)
TV, etc.
2
Connect the supplied AC power
adaptor to the transmitter.
1 2 3
CHANNEL DC IN 9V
to DC IN 9 V jack
AC power
adaptor
(supplied)
Notes
• Use only the supplied AC power adaptor. Do not use
any other AC power adaptor.
Polarity of the plug
• If the connected equipment has the AVLS (Automatic
Volume Limiter System) function, be sure to turn the
function off when using the transmitter. Otherwise,
you will have to turn up the volume of the
headphones, and that may cause noise.
Transmitter
R A L B OFF ON
INPUT NOISE FILTER
to an AC
outlet