Sony LF-X1, LF-X5 Operating Instructions Manual page 41

Connecting via LAN
(Assigning an IP Address
Manually)
1
Perform steps 3 through 6 of "Connecting
via LAN (DHCP)" (1 page 40) to display
the [LAN (DHCP/Manual IP address
Settings)] window.
2
Clear the check box next to [Automatic DNS
configuration], and input the proper value
for [DNS1] and [DNS2].
Clearing the check box for the above
items also clears this check box
Clear this check box.
[Back] [Set]
Refer to the documents provided by
your ISP to input the proper values.
z
Tips
• You may capture and save the configured setup
screen for future reference (1 page 70).
• For details on character entry, see "Entering
Characters" (1 page 116).
The [Internet Connection] window
reappears.
Configuring Network Settings
3
Select [LAN (DHCP/Manual IP address
setting)].
LAN (DHCP/Manual IP address setting)
A confirmation window appears.
4
Select [OK].
This sets the configuration for "LAN
(DHCP/Manual IP address Settings)".
5
Select [Back], [Settings], then select [Exit].
When you are finished...
Connect to the Internet and check that you can
open web pages. For details on how to open a web
page, see "Viewing Web Pages: Basics"
(1 page 74).
Connecting Via LAN (PPPoE)
1
Select [Settings] at the bottom right of the
screen.
If [Settings] is not shown, touch anywhere
on the screen to make it appear.
The [Settings] window appears.
2
Select [Base station].
The [Base station] window appears.
41
Continued