Parts Listing; Parts Drawings - THUNDER TIGER Bandit 3.5 II Assembly Manual

PARTS LISTING

Kit Contents:
M2 Washer (2)
Hull (1)
Stand (1) Double Side Tape A (1)
Rubber Plug (2)
Double Side Tape B (1)
Switch Boot(1)
3x20mm Wood Screw (4)
Switch Plate (1)
Stopper (1)
Waterproof Seal (2)
90-degree Nipple (1)
Balloon(2)
180c.c Tank (1)
EZ Connector (2)
Cap (1)
3x3mm Set Screw (2)
Clunk (1)
Hex Wrench(1)
M2 Nut (2) Silicone Tube (1)
BOAT VOCABULARY
HULL
BOW
PORT
SPONSON
Steering Wire (2)
Upper Deck (1)
Pad (L/1,R/1)
Double Side Tape (2)
Racing No. Deca l (1)
Throttle Wire (1)
Guild Tube (2)
Clevis (2)
Antenna Tube (1)
Servo Tray (1)
STARBOARD
DECK
STERN
4
PJ6212G Tunnel Hull (Green)
PJ6212O (Orange)
PJ6212Y (Yellow)
PJ6213 Display Stand
PJ6214G FRP Upper Deck
PJ6214O
PJ6214Y
Upper Deck (1)
PJ6079 Waterproof Set 3169 EZ Connector
Switch Plate (1)
Rubber Plug (2) Switch Boot (1)
3x3mm Set Screw (2)
M2 Nut (2)
Waterproof Seal (2) Balloon (2)
3261 Fuel Tank
Stopper (1) 90-degree Nipple (1)
Cap (1) Clunk (1)
PJ6216 Magnet Set
Magnet Retainer A (6) Washer (8)
Magnet Retainer B (2) Magnet (8)
PJ6218 Linkage
Clevis (2)
Steering Wire (2)

PARTS DRAWINGS

Stand (1)
PJ6215 Radio Box
2.3x12mm Washer
Radio Box(1) Wood Screw (4)
PJ6219 Hardware
EZ Connector (2)
Double Side Tape A (1)
Hex Wrench(1)
Double Side Tape B (1)
M2 Washer (2)
3x20mm Wood Screw (4)
PJ6082 Recovery Pad
Pad (L/1,R/1)
180c.c Tank (1)
Double Side Tape (2)
Silicone Tube (1)
PJ6217 Racing No. Decal
2x5mm
Wood Screw (8)
2x8mm
Racing No. Deca l(1)
Wood Screw (4)
Throttle Wire (1)
Guild Tube (2)
Antenna Tube (1)
5
Hull (1)