HP C1533A Technical Manual And Integration Manual page 34

Note
6 spaces
For variable block size
mode, use 0 instead of
1024. This does not
apply to Solaris 2.3.
where you should
never use 0.
% mv /vmunix /vmunix.old
% mv ./vmunix /vmunix
shutdown
% sync;halt
ok boot vmunix
1
/kernel/drv/st.conf
########
# Copyright (c) 1992, by Sun Microsystems, Inc.
#ident "@(#)st.conf
tape-config-list =
"HP C1533A", "HP DDS 4mm DAT", "HP-data2",
"HP HP35480A", "HP DDS-DC 4mm DAT", "HP-data1",
"HP HP35470A", "HP DDS 4mm DAT", "HP-data1",
"HP C1537A", "HP DDS3 4mm DAT", "HP-data2",
"HP C1553A", "HP DDS2 4mm DATloader", "HP-data2",
"HP C1557A", "HP DDS3 4mm DATloader", "HP-data2";
HP-data1 = 1,0x34,1024,0x639,3,0x00,0x13,0x03,2;
HP-data2 = 1,0x34,1024,0xd639,4,0x00,0x13,0x24,0x3,3;
name="st" class="scsi"
target= X lun=0;
name="st" class="scsi"
target= X lun=1;
X
HP-data2
0x0,0x13,0x24,0x3
tape-config-list
tape-driver-buffering = 4;
Configuring Drives with Specific Systems
1.6 93/05/03 SMI"
Only add these lines
for an autoloader
Sun Workstations
>
lun=1