Connecting A Dvd Player With Component Video Connectors - Sony WEGA KLV 26HG2 Operating Instructions Manual

Installing and Connecting the TV
Connecting a DVD Player with Component Video
Connectors
16
This is the preferred hookup to use if:
• Your DVD player has component (Y, P
Disconnect all power sources before making any connections.
1
Using a component video cable, connect the DVD player's Y, P
jacks to the Y, P and P
B
connections.
Tip
The Y, P and P jacks on your DVD player are sometimes labeled as Y, C
B R
B-Y and R-Y. If so, connect the cables to the matching colors.
2
Using an AUDIO cable, connect the DVD player's AUDIO OUT jacks to
the TV's AUDIO IN jacks.
Note
The Y, P and P jacks do not provide audio, so audio cables must be connected to
B R
provide sound.
Rear of TV
Y
Tip
• To take advantage of the Wide Screen Modes, set the aspect ratio of the output signal to 16:9
on your DVD player. For details, refer to the operating instructions supplied with your DVD
player.
, P ) jacks.
B R
jacks on the TV. Use the VIDEO 3 IN
R
P
B
P
R
AUDIO-L
AUDIO cable
(white)
(not supplied)
AUDIO-R
(red)
and P
B R
and C , or Y,
B R
Component
video cable
(not supplied)
DVD player