Sony WEGA KLV 23M1 Operating Instructions Manual page 15

Button Description
Press to select the video equipment
0 Input Select
connected to the TV's video inputs.
Buttons
TV: Press to select the TV to watch the
TV programs.
VIDEO 1/2: Press repeatedly to cycle
through the video equipment connected
to the VIDEO 1 IN and the VIDEO 2
IN.
If the video label is selected as "Skip,"
the selected input will be skipped from
the cycle.
VIDEO 3: Press to select the video
equipment connected to the HD/DVD 3
IN.
VIDEO 4: Press to select the video
equipment connected to the HDMI 4 IN.
Press to adjust the volume.
qa VOL +/–
qs RESET Press to reset the settings to the factory
defaults. See pages 58 and 60. Also
used to clear Channel Label.
qd FREEZE Press to freeze the picture. Press again
to restore the picture. For details, see
"Using the Freeze Function" on page
49.
qf POWER Press to turn on and off the TV.
qg DISPLAY Press once to display the current
channel number/channel label and the
Wide Screen Mode, or the current
video input number/video label and the
Wide Screen Mode. When the display
is turned on, the current channel
number/channel label or video input
number/video label remains displayed.
Press it again to turn the display off.
Press repeatedly until the TV displays
qh SLEEP
the time in minutes (15, 30, 45, 60 or
90) that you want the TV to remain on
before shutting off. To cancel Sleep
Timer, press SLEEP repeatedly until
Sleep Off appears.
qj 0 - 9 ENT Press 0 - 9 to select a channel; the
channel changes after 2 seconds. Press
ENT to change channels immediately.
qk MENU Press to display the menu. Press again
to exit from the menu. For details, see
page 38.
Press V/v/B/b to move the on-screen
ql V/v/B/b
cursor. To select an item, press
w; F1 Press to select the function of your
video equipment which is programmed
on the TV's remote control.
wa F2 Press to select the function of your
video equipment which is programmed
on the TV's remote control.
Button
ws CH +/–
wd
When SAT/CABLE (FUNCTION) is on
TV/SAT
wf MTS/SAP
When SAT/CABLE (FUNCTION) is on
GUIDE
.
Description
Press to scan through channels. To scan
quickly through channels, press and
hold down either CH + or CH –.
Press to select the sound effect modes:
SRS WOW, Off. The sound effect
modes can be also accessed in the
Audio menu. For more details, see
"Selecting the Effect Mode" on page
44.
Press to switch between the TV and the
satellite receiver.
Press repeatedly to cycle through the
Multi-channel TV Sound (MTS)
options: Stereo, Auto SAP (Second
Audio Program), and Mono. The MTS
setting can be also accessed in the
Audio menu. For more details, see
"Selecting Stereo or Bilingual
Programs" on page 60.
Press to display the program guide of
your satellite program provider.
15