Watching Tv - Sony WEGA KDE42XBR950, KDE50XBR950, KDE55XBR950, KDE61XBR950 Operating Instructions Manual

Watching TV

z For a complete list of all
the functions of the
remote control, see page
56.
64
To Do This ...
Activate the remote control to
operate the TV
Turn on/off the TV
Tune directly to a channel
Adjust the volume
Mute the volume
Alternate back and forth between
two channels
Display the current channel
number (and other information)
Switch the TV's input to the VCR,
DVD player, or other connected
equipment
Change video and audio options,
customize the TV's setup, set
parental controls, and more
Switch the TV's input between
sources connected to the TV's
VHF/UHF and CABLE inputs
Switch the TV's input to a
connected i.LINK device
Do This ...
FUNCTION
Press repeatedly until the TV
indicator lights up.
POWER
Press
To tune to analog channels, press
ENTER (or wait 3 seconds).
For digital subchannels, press 0-9,
0-9 again, and then ENTER.
For example, to select subchannel 2.1, press 2,
, 1, and then press ENTER.
You can also select digital channels
using the digital program guide.
See page 73 for details.
Press VOL +/–
MUTING
Press (press again to unmute)
Press JUMP
The TV alternates between the current channel
and the last channel tuned.
Press DISPLAY once to display the channel
number, current time, wide mode, and channel
DISPLAY
label (if set). Press
Display off.
Press TV/VIDEO repeatedly to cycle through
the video equipment connected to the TV's
video inputs.
Press MENU to display the Menu. For details,
see "Using the Menus" on page 99.
Press ANT to alternate between sources
connected to the TV's VHF/UHF and CABLE
inputs.
Press i.LINK to display a list of a available
i.LINK devices, and select the desired device
from the list. See page 94 for details.
0-9
and then
, press
again to turn