Vcr And Cable - Sony WEGA KDE-50XS955, KDE-37XS955, KDE-42XS955 Operating Instructions Manual

VCR and Cable

Rear of TV
VIDEO IN
R-AUDIO -L
VIDEO
( MONO )
30
For best results, use this connection if:
s
Your cable company does not require you to use a cable box.
About Using This Connection with Dual Picture (Twin View, etc.) Features
With this connection, you can use all the dual picture features.
To connect the VCR and cable
1
Connect the CATV cable to the VCR's VHF/UHF input jack.
2
Use the 75-ohm coaxial cable (not supplied) to connect the VCR's
VHF/UHF output jack to the TV's CABLE input jack.
3
Use an A/V cable to connect the VCR's A/V output jacks to the TV's
A/V input jacks (VIDEO 1 or 3).
4
Run the Auto Program function, as described in "Setting Up the
Channel List" on page 53.
Using S VIDEO jacks? See page 29.
1
3
S VIDEO
A/V cable
VCR
CABLE
75-ohm
coaxial cable
CATV cable