Lock Options; Changing The Lock/Unlock Code - JVC KT-SR3000 Manual

Lock Options

The KT-SR3000 Receiver has the ability to lockout the use of any channel, or channels you do not want others to access
without your permission. Like the Skip feature, the locked channel will not appear when the user changes channels with
the Up/Down buttons. When the user tries to access the locked channel using the Direct Tuning function, the "Enter
Code" screen will be displayed and the channel will not be accessed until the proper code is entered. While in the "Menu
Options" List mode, follow the steps below to Lock a channel:
1. Use the Up/Down buttons to highlight the "Lock Options". Press the Select key to select.
2. Select "Lock/Unlock" from the Lock Options Menu (below left) and press the Select key to select.
3. Use the Up/Down buttons to select the channel you wish to lock. Press the Knob in to select (below right).

Changing the Lock/Unlock Code

The first time the Lock/Unlock function is accessed, the user must enter the default lock code. The default lock code is
"0000". This code can be maintained or changed. To change the default lock code, perform the following procedure while
in the "Menu Options" List mode:
1. Use the Up/Down buttons to highlight the "Lock Options". Press the Select key to select.
2. Select "Edit Code" from the Lock Options Menu (below left) and press the Select key to select.
3. Enter the default code "0000".
4. The "New Code" prompt will appear. Enter your new four digit code using the 0-9 number buttons (below right). You
will then be prompted to confirm the new code by entering your code again.
5. The lock code is now changed.
Note: you can use this same method to Edit the code once it is changed from the default.