BMW R 1200 GS 2005 Rider's Manual page 116

Connection in the wrong
7
sequence increases the
risk of short-circuits.
114
Always proceed in the correct
sequence.
Never install the battery
without the protective cap.
Connect battery positive
lead 3 first.
Close protective cap 2 for
the battery's positive termin-
al.
Connect battery negative
z
lead 1.
Switch on the ignition.
Fully open the throttle once
or twice.
The engine management
system registers the
throttle-valve positions.
Installing front seat (
Setting the clock (
48)
42)