Other Information; Troubleshooting; Trouble Symptoms And Remedies - Sony WEGA KLV-S19A10 Operating Instructions Manual

Other Information

Troubleshooting

Trouble Symptoms
and Remedies
Problem
No picture (screen not lit), no
sound.
No picture.
No picture.
Cannot receive any channels.
Cannot receive upper channels
(UHF) when using an antenna.
TV is locked to one channel.
Cannot receive any channels
when using cable TV.
Cannot receive or select
channels.
The TV turns off automatically.
No picture from some video
sources.
Poor picture.
Double images or ghosts.
62
Possible Remedies
If your TV does not turn on, and a red light keeps flashing, your TV may
need service. Call your local Sony Service Center.
Check Power Saving settings (page 61).
Make sure the power cord is connected securely.
Turn on the power of the TV.
Check antenna/cable connections.
Set Cable to Off in the Channel settings (page 53).
Perform Auto Program to add receivable channels that are not presently in
the TV's memory (page 53).
Check your Channel Fix setting (page 53).
Perform Auto Program to add receivable channels that are not presently in
the TV's memory (page 53).
Perform Auto Program to add receivable channels that are not presently in
the TV's memory (page 53).
Make sure Cable in the Channel settings is set to On (page 53).
Perform Auto Program to add receivable channels that are not presently in
the TV's memory (page 53).
Check if the Sleep timer is activated (page 58).
Check the connection between the optional video equipment and the TV.
Press TV/VIDEO on the remote control (page 33).
If you connect video equipment to the S VIDEO input of the TV, set Auto
YC to On in the Setup settings (page 61).
Press WEGA GATE on the remote control. Select your desired input from
the External Inputs list.
Check antenna/cable connections.
Check the antenna location and direction.