Tv Controls And Connectors; Front And Top Panel - Sony WEGA KLV-S19A10 Operating Instructions Manual

TV Controls and Connectors

Front and Top Panel

1
ENTER WEGA GATE
Item Description
1 ENTER Press to confirm the selection or setting.
2 WEGA GATE Press to display WEGA GATE. Press again to exit WEGA GATE.
3 TV/VIDEO Press repeatedly to cycle through the video equipment connected to the TV's video inputs.
4 Press to adjust the volume. In the WEGA GATE screen, these buttons serve as left/right
– VOLUME + buttons.
5
Press to scan through channels. To scan quickly through channels, press and hold down either
– CHANNEL + CHANNEL. In the WEGA GATE screen, these buttons serve as up/down buttons.
6 POWER
Press to turn on and off the TV.
7 (IR) Infrared
Receives IR signals from the remote control.
Receiver/Light
Senses room light level and adjusts the screen brightness accordingly (see page 61 for details).
Sensor Do not put anything near the sensor, as its function may be affected.
8 PIC OFF LED
When lit, indicates that the Picture Off feature is activated. For details, see page 61.
9 TIMER LED When lit, indicates one of the timers is set. When the timer is set, this LED will remain lit even
if the TV is turned off. For details, see page 58.
0 POWER LED Lights up in green when the TV is turned on. If the LED blinks in red continuously, this may
indicate the display unit needs servicing (see "Contacting Sony" on page 2).
qa Speaker Outputs audio signal.
2 3 4
TV/VIDEO VOLUME
qa
PIC OFF
7 8
The CHANNEL + button has a tactile dot. Use it as a reference when operating
the TV.
5
CHANNEL
TIMER POWER
9 0
Introducing the TV
6
POWER
13